Production Type | Top Width | Pitch Width | Height | Angle | Length | Length | Length | Length Mark |
Conversion | Range(inch) | Range(mm) | ||||||
ZX | 10 | 8.5 | 6 | 40° | Li=Ld-22 | 20"-200" | 508-5080 | Li |
AX | 13 | 11.0 | 8 | 40° | Li=Ld-30 | 20"-200" | 508-5080 | Li |
BX | 17 | 14.0 | 11 | 40° | Li=Ld-40 | 20"-200" | 508-5080 | Li |
CX | 22 | 19.0 | 14 | 40° | Li=Ld-58 | 20"-200" | 508-5080 | Li |
DX | 32 | 27.0 | 19 | 40° | Li=Ld-75 | 30"-200" | 762-5080 | Li |
3VX(9N) | 9.5 | / | 8 | 40° | La=Li+50 | 20"-200" | 508-5080 | La |
5VX(15N) | 16 | / | 13.5 | 40° | La=Li+82 | 20"-200" | 508-5080 | La |
8VX(25N) | 25.5 | / | 23 | 40° | La=Li+144 | 30"-200" | 762-5080 | La |
XPZ | 10 | 8 | 8.5 | 40° | Lw=Li+30 | 20"-200" | 508-5080 | Lw |
XPA | 13 | 11 | 10 | 40° | Lw=Li+38 | 20"-200" | 508-5080 | Lw |
XPB | 17 | 14 | 13 | 40° | Lw=Li+58 | 20"-200" | 508-5080 | Lw |
XPC | 22 | 19 | 18 | 40° | Lw=Li+73 | 30"-200" | 762-2080 | Lw |
Description
When the toothed belt transmission works, the belt is placed in the corresponding groove on the pulley, and the transmission is realized by the friction between the belt and the two walls of the groove. Cogged V-belt For Agricultural is usually used in combination with several, and the pulley has a corresponding number of grooves. When the Cogged V-belt For Agricultural is used for transmission, the belt is in good contact with the wheel, the slip is small, the transmission ratio is relatively stable, and the operation is stable. Toothed belt transmission is suitable for occasions with short center distance and large transmission ratio (around 7), and can work well in vertical and inclined transmission. In addition, because several V-belts are used together, one of them will not be damaged without causing accidents.
The ratio of top width to height is 1.6:1. The belt structure that uses cords and fiber bundles as tensile elements can transmit much less power than the equal width and narrow V-belts. Due to their high tensile strength and lateral rigidity, this type of belt is suitable for harsh working conditions with sudden load changes. The belt speed is allowed to reach 30m/s, and the bending frequency can reach 40Hz.
Display
Marking
Cogged V-belt For Agricultural length conversion table is available for conversion between various models. And the single specification minimum order quantity, at least for one sleeve of the number of nature.
Application
Cogged V Belt is suitable for various heavy load and temperature sensitive applications. in household facilities, agricultural machinery, heavy machinery，high speed and high power mechanical drive，also applicable to the general power transmission.
Usage
Cogged V-belt For Agricultural cloth protects the inner layer, strong durability. Special core rubber used, small elongation and long service life. Excellent heat resistance, oil-proof and wearing resistance. Prevent the generation of the static electricity and keep safe use. Small friction coefficient and large transmission effect during operaton. Less noise during operation.
Mainly used in kinds of engine equipment transmission, such as engine, motor, mining crushing and conveying equipment etc.
FAQ
1. Where is our company?
The headquarter of our company is located in Hangzhou.
2. Can we provide samples?
Yes. Samples are free offered.
3. Are our belts standard or nonstandard? Can we product in your special requirements?
Most of our belts are nonstandard and of course we can produce in your requirements. For those standard products, there are also several options in different sizes for your choice. For conveyor belts, you can chose your sizes of different width, length and also thickness. For timing belts, not only you can decide on the size, but you can ask to add some special material, such cloth or rubber onto the belts.
Hot Tags: raw edge cogged v-belt for agricultural, China, manufacturers, suppliers, factory, wholesale, Multi V Belt
