Nylon conveyor belts appear to be slipping during use, which affects normal production efficiency. In addition to the nylon conveyor belt itself, slipping is mainly caused by improper operation. The following conveyor belt manufacturers will give you a detailed understanding of the operating reasons for the slippage of the nylon conveyor belt.
1. Too fast starting speed can also constitute slippage. Can start slowly at this moment. It can be started after jog twice, such as using a squirrel cage motor. It can also effectively overcome the slipping phenomenon.
2. The load of the conveyor belt is too large. The ability to cross the motor will also slip. The advantage of slip at this moment is to maintain the motor. Otherwise, the motor will be burned out over time. But in terms of operation, it is a slippage incident.
3. The friction between the drive roller and the conveyor belt is not enough to cause slipping. The reason is mostly water on the conveyor belt or humid environment. The solution is to add some rosin powder on the drum. The blowing equipment should be used to blow in, but be careful not to add it by hand. So as to avoid personal incidents.
