Although nylon conveyor belts are easy to use among all types of conveyor belts, and their integration into the working environment is very strong, so now everyone is more and more like to use conveyor belts of this type of material, but people also It is necessary to clearly understand nylon conveyor belts and cold-resistant conveyor belts. He will also encounter problems in the whole process of work. To deal with these problems, everyone must not escape the problems, but only master the problems, and other problems. Look for the cause of the problem and the way to deal with it, so that you can make your own production and manufacturing work more and more satisfying. So when everyone uses nylon conveyor belts, have they noticed such a problem? It is also assumed that the quality of the conveyor belt is not very good, then some bubbles will appear on the surface, which is actually formed in the process of people's conveyor belt processing. What are the reasons? What?
The reason why this kind of situation occurred early is because the auxiliary material mixed rubber is not very well-balanced, so it will constitute a poor dispersion, so that there will be a rash, then we can see it by puncturing the bubble. For the powder in the meantime, check the working pressure and time of the chamber machine. The temperature may be beyond standard.
The two reasons are because people have infiltrated water, or because the moisture content is relatively high under rainy conditions. Therefore, if you want to deal with this problem, people still suggest that everyone should ensure the environmental humidity of the warehouse. Install equipment to control the environmental humidity in the warehouse to ensure that the natural environment of people's nylon conveyor belts meets the requirements. The nature has already burned. This problem will also occur, or excessive iron smelting will also produce bubbles. In the current situation, it is very simple to generate bubbles by pressing air into our rubber compound. Excessively high temperature of the vulcanized rubber or part of the temperature is too high, which is also a very simple problem to cause bubbles.
