Nylon conveyor belts have high strength and good groove forming properties, so they are recognized by people. If you use them often, you will find the phenomenon of damage to the rubber surface, which makes it impossible to use. So in this case, we must try our best to prevent this from happening. What are the methods?
One of the methods is to prevent the conveyor belt from being subject to greater impact. If the design of the hopper of the conveying system has too large a drop, unreasonable guidance to the coal flow, and a large amount of material in the system, the conveying belt may be impacted, forming more pits on the belt surface and harming the rubber surface.
The two conditions prevent touching high temperature materials. When the nylon conveyor belt conveys the dirty slag coal in the boiler room, the uncooled high-temperature dirty slag coal melts the conveyor belt masking glue, which intensifies the abnormal wear of the belt surface. Other sparks and slag generated during electric welding and gas cutting can also damage the tape masking glue.
The three conditions are also more important, that is, the quality of the conveyor belt. During the production process of nylon conveyor belt, due to insufficient adhesive force of the rubber material, defects in the process, or inadequate control of a certain production process, the reaction force of friction makes the masking rubber gradually peel off, and the surface masking rubber will tear when it is severe.
In short, to prevent the rubber surface of nylon conveyor belt from harming, pay special attention to it from production to input. Regarding the quality, we should pay attention to the purchase, go to a regular manufacturer, can reduce this situation. During the transportation process, pay attention to the details and standardize the operation to reduce this situation.
