Pay Attention To The Details In The Production Of Conveyor Belt

                                   In the process of nylon conveyor belt, it is generally necessary to ensure that the quality of the glue is up to the standard when rubbing the glue in the strong layer, and the glue should be uniform when scraping, so as to ensure that there is no delamination during use, and it must be ensured while vulcanizing The temperature control of the vulcanizing machine generally needs to be controlled at about 200 degrees, and the temperature should not be too high, because this will damage the strength of the covering layer. The raw rubber required for the covering layer must be cooled by the cooling line before it can be used. The glue must be cooled for 10 hours to ensure that the chemical reaction of the various small materials of the raw rubber species is high, so that it can reach the strong standard we need. Only when the above points are met, the repair rate of the nylon production process will be low. Beautiful appearance.