Production Type | Top Width | Pitch Width | Height | Angle | Length | Length | Length | Length Mark |
Conversion | Range(inch) | Range(mm) | ||||||
HI | 25.4 | 23.6 | 12.7 | 40° | Li=La-80 | 30"-200" | 762-5080 | Li |
HJ | 31.8 | 29.6 | 15.1 | 40° | Li=La-95 | 30"-200" | 762-5080 | Li |
HK | 38.1 | 35.5 | 17.5 | 40° | Li=La-110 | 50"-200" | 1270-5080 | Li |
HL | 44.5 | 41.4 | 19.8 | 40° | Li=La-124 | 50"-200" | 1270-5080 | Li |
HM | 50.8 | 47.3 | 22.2 | 40° | Li=La-139 | 50"-200" | 1270-5080 | Li |
W16 | 17 | / | 6 | 28° | / | 20"-200" | 508-5080 | La |
W20 | 21 | / | 7 | 28° | / | 20"-200" | 508-5080 | La |
W25 | 26 | / | 8 | 28° | / | 30"-200" | 762-5080 | La |
W31.5 | 33 | / | 10 | 28° | / | 20"-200" | 508-5080 | Lw |
W40 | 42 | / | 13 | 28° | / | 20"-200" | 508-5080 | Lw |
W50 | 52 | / | 16 | 28° | / | 20"-200" | 508-5080 | Lw |
W63 | 65 | / | 20 | 28° | / | 30"-200" | 762-5080 | Lw |
W80 | 83 | / | 26 | 28° | / | 20"-200" | 508-5080 | Lw |
W100 | 104 | / | 32 | 28° | / | 20"-200" | 508-5080 | Lw |
1022V | 16 | / | 6 | 28° | / | 20"-200" | 508-5080 | Lw |
1422V | 22 | / | 8 | 28° | / | 30"-200" | 762-5080 | Lw |
1922V | 30 | / | 11 | 28° | / | 20"-200" | 508-5080 | Lw |
2322V | 36.5 | / | 12 | 28° | / | 20"-200" | 508-5080 | Lw |
2926V | 46 | / | 14 | 28° | / | 20"-200" | 508-5080 | Lw |
4430V | 70 | / | 17 | 28° | / | 30"-200" | 762-5080 | Lw |
4836V | 76 | / | 22 | 28° | / | 30"-200" | 762-5080 | Lw |
6236V | 100 | / | 26 | 28° | / | 30"-200" | 762-5080 | Lw |
Characteristics
1. The Industrial Drive Belt has two structures: cloth covered or trimmed. The special rubber fiber characteristics determine that it has high lateral rigidity and longitudinal flexibility, high load capacity and long life.
2. Cast teeth reduce heat accumulation or stress concentration and extend belt life.
3. The smooth running structure makes theIndustrial Drive Belt only slightly change when running at high speed.
4. Meet RMA oil and heat resistance standards.
Display
Marking
Industrial Drive Belt length conversion table is available for conversion between various models. And the single specification minimum order quantity, at least for one sleeve of the number of nature.
The marking of Industrial Drive Belt show the inside length or pitch length of factory V-belts. The length conversion table is available for conversion between different models.
Hot Tags: industrial drive belt, China, manufacturers, suppliers, factory, wholesale, V belt Drives
