Wrapped V-belts for Garden Technic

Features

Wrapped V-belts For Garden Technic feature simple structure, easy production ,smooth transmission, small mechanical vibration, wide applicability and convenient maintenance.

Tips

Wrapped V-belts For Garden Technic is widely used in agricultural machinery. The standardized V-belt section is trapezoidal, and the entire circle has no joints. V-belt model selection is based on the power and speed delivered.

(1)Select the correct model. 

The selected model must be accurate, otherwise the Wrapped V-belts For Garden Technic will be abnormal in the pulley groove. When changing to a V-belt, it is best to bring the old belt to the agricultural machinery department for purchase, in case the model is mistaken.

(2)Install correctly. 

Before installation, if the center distance of the two shafts is adjustable, the center distance should be shortened first, and the center distance should be adjusted as required after the tape is installed; if the center distance of the two shafts is not adjustable, you can put a V belt first Put it into the wheel groove, and then turn another pulley to install the V-belt, and install all the Wrapped V-belts For Garden Technic in the same way. It is forbidden to use tools to pry or pull hard during installation to prevent the V-belt from being too long or too loose or too tight.

(3)Prevent crossover.

 When installing the pulley, the centers of the two upper pulleys must be aligned, otherwise the V-belt pole will work, which will cause serious wear and reduce the service life.

(4)The tension is moderate.

The tension of the V-belt must be checked and adjusted frequently to make it meet the requirements. The V-belt is too loose not only to slip easily, but also to increase the wear of the Wrapped V-belts For Garden Technic , and even unable to transmit power; too tight, not only will the V belt be elongated and deformed, easily damaged, but also cause the engine main bearing and clutch bearing to be caused by excessive force. Accelerate wear. The correct inspection method is: apply a vertical pressure of about 2kg in the middle of each tape by hand, and the appropriate sink amount is 20-30mm. If it is not suitable, adjust it in time.

Display

Marking

The marking of agricultural belt show the inside length of factory Wrapped V-belts For Garden Technic. The length conversion table is available for conversion between different models.

FAQ

Q:Is your price favorable?

A:Our price has high cost performance, the more we buy, the cheaper the price

Q: Can I add or delete items from my order if I change mind?

A: Yes, but you need to tell us asap, if your order has been done in our production line, we cannot change it.

Q:What products can you offer?

We supply products of all types of rubber transmission belts, with main products of transmission belts used in automobile, agriculture and mechanics, petroleum industry and power generation

Hot Tags: wrapped v-belts for garden technic, China, manufacturers, suppliers, factory, wholesale, Flat Power Transmission Belts, Troughed Conveyor Belt, Flat Flex Conveyor Belt, Supermarket Conveyor Belt, Engine Timing Belt, Multirib V-belt