The working surface of the Raw Edge V Belt is made into a tooth shape. Generally, a thin steel wire rope is used as a strong layer, and the outside is covered with polychloride or grease neoprene.
Production Type | Top Width | Pitch Width | Height | Angle | Length | Length | Length | Length Mark |
Conversion | Range(inch) | Range(mm) | ||||||
ZX | 10 | 8.5 | 6 | 40° | Li=Ld-22 | 20"-200" | 508-5080 | Li |
AX | 13 | 11.0 | 8 | 40° | Li=Ld-30 | 20"-200" | 508-5080 | Li |
BX | 17 | 14.0 | 11 | 40° | Li=Ld-40 | 20"-200" | 508-5080 | Li |
CX | 22 | 19.0 | 14 | 40° | Li=Ld-58 | 20"-200" | 508-5080 | Li |
DX | 32 | 27.0 | 19 | 40° | Li=Ld-75 | 30"-200" | 762-5080 | Li |
3VX(9N) | 9.5 | / | 8 | 40° | La=Li+50 | 20"-200" | 508-5080 | La |
5VX(15N) | 16 | / | 13.5 | 40° | La=Li+82 | 20"-200" | 508-5080 | La |
8VX(25N) | 25.5 | / | 23 | 40° | La=Li+144 | 30"-200" | 762-5080 | La |
XPZ | 10 | 8 | 8.5 | 40° | Lw=Li+30 | 20"-200" | 508-5080 | Lw |
XPA | 13 | 11 | 10 | 40° | Lw=Li+38 | 20"-200" | 508-5080 | Lw |
XPB | 17 | 14 | 13 | 40° | Lw=Li+58 | 20"-200" | 508-5080 | Lw |
XPC | 22 | 19 | 18 | 40° | Lw=Li+73 | 30"-200" | 762-2080 | Lw |
Features
The working surface of the Raw Edge V Belt is made into a tooth shape. Generally, a thin steel wire rope is used as a strong layer, and the outside is covered with polychloride or grease neoprene. The midline of the strong layer is defined as the pitch line of the belt, and the perimeter of the belt line is the nominal length. The basic parameters of the belt are the period p and the modulus m. The circumferential node p is equal to the size measured along the nodal line between the corresponding points of two adjacent teeth, and the modulus m=p/π. China's synchronous toothed belt adopts a modular system, and Raw Edge V Belt‘s specifications are expressed by modulus × bandwidth × number of teeth.
Display
Marking
Raw Edge V Belt length conversion table is available for conversion between various models. And the single specification minimum order quantity, at least for one sleeve of the number of nature.
Application
Raw Edge V Belt is suitable for various heavy load and temperature sensitive applications. high speed and high power mechanical drive,also applicable to the general power transmission.
FAQ
Q1. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q2. Can I have a sample order?
A:Yes, any sample order is welcome to know the quality of our products.
Q3. How much is the minimum quantity for each item in one order?
A:The sample is free, the customer pays the express fee, the sample quantity is 1, the minimum order quantity, One mould
Q4. What is your terms of payment?
A:30%TT in advancing payment,the rest will be paid when see the copy of B/L
Hot Tags: raw edge v belt, China, manufacturers, suppliers, factory, wholesale, Telescopic Conveyor Belt, Sidewall Conveyor Belt, Flat Conveyor Belt, Car Ac Belt, Mobile Conveyor Belt, Mini Conveyor Belt
Previous: Cogged Belt
Next: Raw Edge Belts
May 10, 2021
May 10, 2021